|
Site Admin |
Joined: Mon Jun 29, 2009 5:37 am Posts: 103
|
As long as the EPROM versions are the same (to print EPROM version, insert the key marked 'C' into the lock and turn the key to S mode which is one extra click past P mode where nothing is written, 50 SUBTOTAL) then you can use the PC utility to transfer the program. The utility should be available from a local dealer. Make sure you use the correct utility for your EPROM version or you may cause data loss. This is normally a dealer function which is why it is this difficult. Modern machines often have data card slots for transfer but it was all done by dealer utilities when this model was released. A dealer will usually do the job for you fairly cheaply if you drop them into them. Also remember that the internal memory battery should be replaced if it is more than four years between replacements. This will protect your data when the machine is unplugged.
|
|