| Forums https://the-checkout-tech.com/forums/ |
|
| sam4s er-5200m programming https://the-checkout-tech.com/forums/viewtopic.php?f=7&t=501 |
Page 1 of 1 |
| Author: | soonerhog12 [ Fri May 16, 2014 5:02 pm ] |
| Post subject: | sam4s er-5200m programming |
I have two sam4s er-5200m's and would like to download data programming from one to the other. Does anyone know how or how I find this info. thanks |
|
| Author: | TheCheckOutTech [ Fri May 16, 2014 11:53 pm ] |
| Post subject: | Re: sam4s er-5200m programming |
As long as the EPROM versions are the same (to print EPROM version, insert the key marked 'C' into the lock and turn the key to S mode which is one extra click past P mode where nothing is written, 50 SUBTOTAL) then you can use the PC utility to transfer the program. The utility should be available from a local dealer. Make sure you use the correct utility for your EPROM version or you may cause data loss. This is normally a dealer function which is why it is this difficult. Modern machines often have data card slots for transfer but it was all done by dealer utilities when this model was released. A dealer will usually do the job for you fairly cheaply if you drop them into them. Also remember that the internal memory battery should be replaced if it is more than four years between replacements. This will protect your data when the machine is unplugged. |
|
| Author: | soonerhog12 [ Mon May 19, 2014 6:54 pm ] |
| Post subject: | Re: sam4s er-5200m programming |
Does anyone know who in the NW Arkansas, SW Missouri, or NE Oklahoma area that could handle this operation? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|