Forums https://the-checkout-tech.com/forums/ |
|
Needing help with Sharp era320 https://the-checkout-tech.com/forums/viewtopic.php?f=6&t=44 |
Page 1 of 1 |
Author: | Careygw [ Thu Jun 17, 2010 9:51 pm ] |
Post subject: | Needing help with Sharp era320 |
Hi, Just wondering if this model cash reg can be changed into a 15 dept key instead of the 11 key it is right now? It currently has 6 large keys and 5 smaller keys. We use 15 departments and any info would be greatly appreciated. Thanks |
Author: | c-tech [ Thu Jun 17, 2010 10:06 pm ] |
Post subject: | Re: Needing help with Sharp era320 |
Hi. Yes it can. You buy a key top kit from your local Sharp dealer which has different sized keys to fit to the keyboard. Sometimes you have to open the extra departments in programming, but that is not hard. If you get a key top kit, I can help you to set it up. ******************************************************************* If anyone is looking for a Sharp ER-A320 manual, go here: http://the-checkout-tech.com/manuals/ca ... Sharp5.php |
Author: | Careygw [ Wed Jun 23, 2010 5:39 pm ] |
Post subject: | Re: Needing help with Sharp era320 |
That would be great. I have extra keys already. We have one someone gave us |
Author: | c-tech [ Wed Jun 23, 2010 10:18 pm ] |
Post subject: | Re: Needing help with Sharp era320 |
Okay. Install the kit as shown in the diagrams. The kit will usually have many sizes, so just install the singles if you want the full amount of departments. Then turn to REG mode and see if you can use them. If they don't work, let me know. Attachment: keytop1.JPG [ 56.61 KiB | Viewed 15134 times ] Attachment: keytop2.JPG [ 9.58 KiB | Viewed 15134 times ] |
Author: | Careygw [ Sat Jul 24, 2010 2:04 pm ] |
Post subject: | Re: Needing help with Sharp era320 |
I have all the single keys in place but they will not work |
Author: | c-tech [ Sun Jul 25, 2010 4:06 am ] |
Post subject: | Re: Needing help with Sharp era320 |
That should mean they need to have a department code. This may work in program mode so you can try that. If not, you will need a service key which is not too difficult. Turn the key to PGM Type 9950 Press the decimal point @/for 1 enter a department number on the number pad Press one of your new departments CASH If the department still doesn't work during a sale, then you need another code, just tell me |
Author: | Careygw [ Sat Sep 11, 2010 12:08 pm ] |
Post subject: | Re: Needing help with Sharp era320 |
I have all the keys in place and working. Each key has been assigned with tax codes and the tax codes have been set. During a sale the tax will not add on to the total? Is there something I missed? |
Author: | c-tech [ Sun Sep 12, 2010 12:51 am ] |
Post subject: | Re: Needing help with Sharp era320 |
You might have set them as hash (non add) departments accidentally. The best idea is to print the settings for all departments, then program them the same as the working ones. Do a department program read and compare the settings. Let me know if you have trouble. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |