| Forums https://the-checkout-tech.com/forums/ |
|
| TEC MA1400 programming help https://the-checkout-tech.com/forums/viewtopic.php?f=10&t=559 |
Page 1 of 1 |
| Author: | DCShoes [ Thu Jan 12, 2017 9:14 am ] |
| Post subject: | TEC MA1400 programming help |
Hi there, Does anyone know what the SFKC code is to program a key for "Money Declaration"? In other words, like 112 is for a "STOCK" key function, and 94 is for "RECEIPT POST ISSUE" etc. I have a programming manual and the option is listed on address 19, bit #7, but doesn't give the code to assign a key for this option on the SFKC table. The machine did have this programmed previously, and worked fine until we had to do a RAM clear. Thanks |
|
| Author: | TheCheckOutTech [ Thu Jan 12, 2017 10:38 pm ] |
| Post subject: | Re: TEC MA1400 programming help |
Hi, The key label probably has been changed by a programmer to make it easier for the operator. It is often called cash in drawer or cash declaration. See if you can find something like that label |
|
| Author: | DCShoes [ Fri Jan 13, 2017 5:06 pm ] |
| Post subject: | Re: TEC MA1400 programming help |
Thanks for the info. Closest I can find is this: - SFKC Code 90 -> # or #/CID button (Non-Add Number/Cash In Drawer) But, AFAIK, this is the button that would normally give you a "short" X reading, not a cash declaration before allowing a Z reading. (Cash Declaration or "cash up" had to be pushed first on Z, the drawer would open and all currency and tender entered, thereafter AT/TL pressed twice before the till would print out a Z reading. At the very bottom of the Z reading it prints what tenders are over or under declared as well - identical to a "cash up") Anyone that knows more on this? There is a code to allocate this button on the keyboard, but I can't find it anywhere. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|