Forums https://the-checkout-tech.com/forums/ |
|
Uniwell UX-70 / CRC Error https://the-checkout-tech.com/forums/viewtopic.php?f=10&t=446 |
Page 1 of 1 |
Author: | rados [ Wed Aug 07, 2013 10:10 am ] |
Post subject: | Uniwell UX-70 / CRC Error |
Dear colleagues, This is my first topic here. I am a owner of a electronic repair shop in Austria , and actually have a problem with a Uniwell UX-70 cash register. Regularly I don not repair cash ragisters, so I unfortunatelly do not have any experience in this field of electronic equipment. remedy: When you switch on the apparatus on the Disply one can read "CRC-Error" " E-99 " Maybe a colleague has had a similar problem, and can tell me the cause. Thanx in advance ...sorry for my bad english... |
Author: | TheCheckOutTech [ Wed Aug 07, 2013 11:03 am ] |
Post subject: | Re: Uniwell UX-70 / CRC Error |
I haven't had this error but if it is a file CRC problem, then it may be due to a flat or faulty battery. If the customer has switched the machine off for some time (such as a month or more), the battery will have gone flat and lost the programming. It would require a RAM clear and re-programming using the programming tables. They are in this manual: http://the-checkout-tech.com/manuals/ca ... anual.html |
Author: | rados [ Wed Aug 07, 2013 1:15 pm ] |
Post subject: | Re: Uniwell UX-70 / CRC Error |
Dear Admin, Many Thanx for your answer. Indeed the battery was faulty within this machine. I' ve allready replaced them, but the fault didn't changed. I will try to solve the problem by reprogramming it. I'll report the success. |
Author: | TheCheckOutTech [ Wed Aug 07, 2013 10:22 pm ] |
Post subject: | Re: Uniwell UX-70 / CRC Error |
Ah, well, there you go. It must be RAM cleared if you change the battery since the memory will be corrupt. |
Author: | rados [ Mon Aug 26, 2013 12:00 pm ] |
Post subject: | Re: Uniwell UX-70 / CRC Error |
Dear Admin, Dear friends of cash registers So, in the mean time I could get a second cash register to copy the content of the RAM memory from one machine to the other via RS232 interface. But after inspection of the second machine I could detect a defective memory as well. So now I have two ragisters with the same fault. CRC ERROR 99 E - 99 I tried the RAM initial reset, but without success. Pls could you give me some advise about the steps to do. Many Thanx in advance Rados |
Author: | TheCheckOutTech [ Mon Aug 26, 2013 12:23 pm ] |
Post subject: | Re: Uniwell UX-70 / CRC Error |
Look up RAM test. You must perform this procedure from the manual using the layout shown in the diagrams. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |